GLF Polska Mielec · Trzciana/Czermin

Wood pellets from Czermin – A1 classification and product certificate

GLF Polska Mielec Sp. z o.o. manufactures pine and spruce wood pellets in Trzciana/Czermin. Match the fuel specification to your boiler and handling system, then agree quantity, packaging and delivery with GLF.

Certificate 0968/2023 is marked as suspended in the PIT Certification register dated 29 June 2026. Read about its status.

Close-up of wood pellets and pieces of firewood.
Wood pellets and firewood. Illustrative image.

Published product certificate

Product certificate document 0968/2023 for pine and spruce wood pellets
Product certificate 0968/2023Open the original document (PDF)

As stated in product certificate 0968/2023

Wood species
Pine and spruce
Production site
Trzciana, Czermin
Standard cited in the document
PN-EN ISO
17225-2:2021-10

When purchasing wood pellets, you need fuel with properties suited to your plant. Delivery requirements also need to be clearly defined. The quality class, product documentation and delivery specification together provide a basis for your purchasing decision.

The A1 documentation for Trzciana/Czermin identifies pine and spruce pellets under PN-EN ISO 17225-2:2021-10. The fuel specification and delivery details connect the product's properties with the requirements of your plant; certificate status is recorded in the product-certificate section.

01 / Quality class

What does A1 mean for wood pellets?

A1 is a quality class in ISO 17225-2, the standard for graded wood pellets. The class sets requirements for the raw material and the fuel’s physical and chemical properties. These include moisture content, ash content, mechanical durability, fines content, dimensions and calorific value.

For purchasers, the standard provides a common basis for specifying requirements and comparing fuels. You also need to check that the pellets meet the equipment manufacturer’s requirements.

The designation PN-EN ISO 17225-2:2021-10 in GLF’s certificate refers to the Polish national edition of the ISO standard adopted as a European standard. The Swedish equivalent is SS-EN ISO 17225-2:2021. A1 is the quality class within the standard.

Close-up of stacked timber blanks at GLF’s production facility in Sävsjöström.
Timber blanks at GLF’s production facility in Sävsjöström. An image from the GLF Group’s operations.

02 / Product documentation

What does GLF’s product certificate cover?

The published document is product certificate 0968/2023, issued by Sieć Badawcza Łukasiewicz – Poznański Instytut Technologiczny.

Product certificate document 0968/2023 for pine and spruce wood pellets
View the original

Product certificate · Wood pellets

Wood pellets – quality class A1

Certificate number0968/2023

Information stated in product certificate 0968/2023
Item As stated in the product certificate
Manufacturer GLF Polska Mielec Sp. z o.o.
Production facility Trzciana 481 A, 39-304 Czermin, Poland
Product Pine and spruce wood pellets
Quality class A1
Standard PN-EN ISO 17225-2:2021-10
Issue date 28 May 2024
Period stated in the certificate 28 May 2024–27 May 2027
Certificate status

The PIT Certification public register dated 29 June 2026 (Excel) lists certificate 0968/2023 as suspended. The end date printed on the certificate does not, by itself, establish that the certification is active. Request up-to-date confirmation of the certificate’s status if active product certification is a requirement for your order.

Open the product certificate (PDF)

Scope of the document

The certificate identifies the A1 product and tested specimen on which the certification was based. The product specification and relevant test reports provide the measured fuel properties for comparison with the plant's requirements.

You can read the original pellet certificate (PDF) and find out more about GLF’s plant in Trzciana/Czermin.

03 / Fuel properties

Which properties matter when purchasing?

Compare the documented properties with the requirements for your boiler, burner and fuel handling system.

  • Moisture content

    Affects the fuel’s energy content per kilogram. Check the value and the test on which it is based.

  • Ash content

    Describes the amount of ash remaining after testing. This helps you assess ash handling requirements. Compare values expressed on the same basis.

  • Mechanical durability

    Describes how well the pellets withstand impact and abrasion during handling and transport.

  • Fines content

    Indicates the proportion of small particles. Check which stage of the supply chain the value refers to, as handling can affect fines content.

  • Diameter and length

    The dimensions need to meet the equipment’s requirements for fuel and feeding.

  • Calorific value

    Check whether the figure is a net or gross calorific value, the moisture content to which it applies and the unit used.

Distinguish between three types of information

The standard’s
specified limit

A measured value
in a test report

An agreed value for the current delivery

A test result describes the material tested. Specify the agreed properties of the delivery in the order documentation.

04 / Standards and certification

The difference between A1, ENplus and DINplus

ISO 17225-2 defines quality classes for graded wood pellets, including A1. The cited product certificate identifies the pine and spruce pellet product and the tested parameters.

ENplus and DINplus are separate certification schemes. They have their own rules covering matters such as testing, inspection and the use of certification marks. ENplus also sets requirements for operations and handling within the supply chain.

A1 is the quality classification used in the cited product certificate. ENplus and DINplus use their own scheme certificates and marks.

Pellet quality is documented through the fuel specification and applicable product test reports. GLF's pallet and management-system certificates cover the activities stated in those documents.

05 / Before ordering

What documentation is needed when ordering?

Make sure the quotation and order confirmation clearly identify the correct product, manufacturer and production facility. The documentation should also include:

  • The agreed quality class and edition of the standard.
  • A product specification with properties and tolerances.
  • Relevant test reports, including dates and sample identification.
  • The certificate number and current status where certification is a purchasing requirement.
  • Information identifying the delivery or batch.
  • The agreed packaging, quantity and delivery terms.

If you have specific requirements for raw material origin, raw material streams or additives, these requirements also need to be documented.

06 / Use and handling

Questions about use, storage and delivery

Are A1 pellets suitable for my plant?

The boiler and burner manufacturer's permitted fuels, dimensions and quality requirements, together with feeding and storage conditions, determine which pellets suit your plant.

How should the pellets be stored?

Protect the pellets from moisture and precipitation. Plan handling to limit unnecessary abrasion and the formation of fines. Bulk storage facilities require appropriate procedures for ventilation, access and safety. Follow the instructions for your plant and those provided by the supplier.

What needs to be confirmed before delivery?

GLF agrees the packaging, quantity, destination, unloading arrangements and delivery timing for each enquiry. Include vehicle-access, receiving and storage conditions so the arrangement fits your site.

07 / Request a quotation

Checklist for requesting a quotation

Have the following information ready when you contact us:

  • Your plant’s requirements for fuel quality and pellet dimensions.
  • The required quantity and delivery period.
  • The delivery address and unloading arrangements.
  • The preferred packaging or delivery format.
  • Requirements for the product specification, test reports and certification.
  • Any requirements for raw materials, additives and traceability.

GLF uses these requirements to discuss the fuel specification, documentation and a delivery arrangement for your plant.

Contact GLF