Pallets · Special · Special pallets

Flexpallet – an adjustable custom pallet

Flexpallet article 2101 is an adjustable custom pallet with a base pallet that can be supplemented by one or two wings according to the goods’ length. Dimensions, weight and load capacity are established for the selected specification in the quote. The construction is covered by patent publication EP 2 502 842.

Article
2101
Price
Request a quote for the current price and availability

Would you like to review dimensions, load and handling? Book a meeting (Swedish)

Flexpall • article 2101

A custom pallet adapted to the length of the goods

Flexpall consists of a base pallet that can be fitted with one or two wings. The wings adapt the support surface to the goods' length and support points. Do you need different materials, attachments or an entirely new design? See custom pallet.

Product specification

Verified product information for article 2101
ProductFlexpallet – adjustable custom pallet
Article number2101
CategoryPallets / Special / Special pallets
DimensionsTailored to the goods and handling requirements
ConstructionBase pallet with one or two wings for varying goods lengths. May reduce the need to stock several fixed pallet formats.
Maximum loadCalculated for the selected design and load case in the quote
WeightVaries with dimensions, materials and construction
Patent publicationEuropean patent publication EP 2 502 842 concerns an adjustable pallet system; legal status may vary between countries
ExportWooden components can be heat-treated and marked according to ISPM 15 when required by the destination
PriceRequest a quote for the current price and availability

Product overview

Verified Flexpallet specifications

Dimensions, weight and load capacity vary with the design. They are therefore established in the drawing and quote for the product to be transported.

Construction and design

Base pallet with one or two wings for varying goods lengths. Can reduce the need to stock several fixed pallet sizes. Engineered according to the goods’ weight, bearing points and handling.

Base pallet and wing · a Flexpall example

Drawings M35-01 and V4-01 show a base pallet and a separate wing. Both have lengthwise boards, with different quantities and positions. The dimensions apply to these drawing examples. The base pallet, number of wings and specification are adapted to the order.

M35-01 · base pallet
Base pallet · 800x1380 M35-01Base pallet with five longitudinal deck boards. Three are 96 mm wide and two are 72 mm wide. Length L is horizontal and width B is vertical. Placement is shown schematically.L 1 380 mmW 800 mm
Base pallet with five longitudinal deck boards. Three are 96 mm wide and two are 72 mm wide.
Information for the drawing example
Drawing componentBase pallet
Format shown in the drawing1 380 × 800 mm
Longitudinal boards5 pcs
Board widths3 × 96 mm and 2 × 72 mm
Board thickness16 mm
Drawing number800x1380 M35-01 · rev. 3
View the original drawing · 800x1380 M35-01Original drawing 800x1380 M35-01, revision 3: Base pallet with five longitudinal deck boards. Three are 96 mm wide and two are 72 mm wide.Open the original drawing (PDF)
V4-01 · wing
Separate wing · 800x1480 V4-01Separate wing with four longitudinal 72 mm boards and support at one end. The wing dimensions are not the assembled pallet’s overall length. Length L is horizontal and width B is vertical. Placement is shown schematically.L 1 480 mmW 800 mm
Separate wing with four longitudinal 72 mm boards and support at one end. The wing dimensions are not the assembled pallet’s overall length.
Information for the drawing example
Drawing componentSeparate wing
Format shown in the drawing1 480 × 800 mm
Longitudinal boards4 pcs
Board widths4 × 72 mm
Board thickness16 mm
Drawing number800x1480 V4-01 · rev. 3
View the original drawing · 800x1480 V4-01Original drawing 800x1480 V4-01, revision 3: Separate wing with four longitudinal 72 mm boards and supports at one end. The wing format is not the overall length of the assembled pallet.Open the original drawing (PDF)
More construction and drawing examples

Drawing example · FlexPall 4051

Drawing example. The dimensions describe this construction and are not standard dimensions for article 2101. Internal drawing article 4051; its connection to article 2101 is not established. Six deck boards and four separate fixing boards, rather than four continuous runners.

Drawing example 4051 · view along the 800 mm sideDrawing example 4051, 800 × 600 mm: six deck boards, two of four cross boards, two ordinary blocks and one of two double FLEX assemblies, plus four fixing boards, are visible along the 800 mm side.

Drawing example 4051, 800 × 600 mm: six deck boards, two of four cross boards, two ordinary blocks and one of two double FLEX assemblies, plus four fixing boards, are visible along the 800 mm side.

Select a component in the diagram and dimension table.

Deck boards
Six deck boards are visible. The two centre boards lie next to each other at the division.
Cross boards
Two of the four 400 mm cross boards are visible, one per half. The other board in each half is behind it.
Blocks and FLEX assemblies
Two ordinary blocks and one double FLEX assembly are visible. There are four ordinary blocks and two FLEX assemblies in total. Each FLEX assembly comprises two 75 mm halves connected by plastic straps.
Underside boards
The ends of four separate fixing boards are visible. They are not four continuous longitudinal runners.

Total construction height

16 + 16 + 90 + 16 = 138 mm

Component dimensions · length × width × thickness or assembled height
Deck boards6 pcs · 600 × 75 × 16 mmThe bill of materials specifies 10 pieces of this cross-section: 6 deck boards + 4 underside boards according to the views
Runners / bottom boards4 pcs · 600 × 75 × 16 mmFour separate fixing boards, rather than four continuous longitudinal runners
Cross boards4 pcs · 400 × 75 × 16 mm
Blocks4 pcs · 75 × 75 × 90 mmStandard wood-chip blocks
FLEX block assembly2 pcs · 75 × 150 × 90 mmOriginal notation 75×(2×75)×90. Two block components per assembly, connected by plastic straps.

Drawing example · 2101 Damstahl 2520x1260

Drawing example. The dimensions describe this construction and are not standard dimensions for article 2101. A separate beam pallet from a customer drawing; it is not presented as a verified FLEX construction.

Damstahl customer drawing · view along the 1 260 mm sideSeparate Damstahl customer example, 2 520 × 1 260 mm: five deck boards and one of three cross beams are visible. This is a beam pallet without blocks or cross boards.

Separate Damstahl customer example, 2 520 × 1 260 mm: five deck boards and one of three cross beams are visible. This is a beam pallet without blocks or cross boards.

Select a component in the diagram and dimension table.

Deck boards
The ends of all five 2 520 mm deck boards are visible along the 1 260 mm side.
Cross beams
The 1 260 mm long side of one of the three cross beams is visible. The others are behind it. The beam's assembled height is 70 mm and its width in plan view is 45 mm. The drawing also shows a 20 × 10 mm groove that is not visible in this long-side profile.

Total construction height

22 + 70 = 92 mm

Component dimensions · length × width × thickness or assembled height
Deck boards5 pcs · 2 520 × 100 × 22 mm
Feet / beams3 pcs · 1 260 × 45 × 70 mmBill-of-materials order 1260×70×45. The assembled height of 70 mm is shown in the side view.

Load capacity and load conditions

Custom load case

Designed around the goods

Engineered according to the goods’ weight, bearing points and handling, using the selected base pallet and one or two wings.

Robot cell with a wooden pallet at GLF’s production facility in Genarp.

Manufacturing and customisation

Manufacturing at GLF

CAD design and robotic nailing capability in Genarp.

Pallet lengths up to 1 600 mm on the production line; 800–3 000 mm in a separate pallet robot. The manufacturing method is selected for the construction.

Production in Genarp →

Flexpallet article 2101 with adjustable wings
Flexpallet article 2101 – a base pallet supplemented by one or two wings.

Adjustable support

When a standard pallet does not provide the right support area

The Flexpallet is particularly relevant where the goods vary in length or support points must be positioned beyond an ordinary base pallet. The number of wings, their length and the pallet’s load-bearing components are defined around the product.

  • A base pallet as the foundation
  • One or two wings as required
  • Designed according to goods, load cases and handling
  • Drawing and quote information for each specification

Quote process

How the right Flexpallet is specified

The information must clarify where the goods require support and which load case the pallet must be designed for.

  1. 01

    Describe the goods

    Specify length, width, weight, support points, lifting and how the pallet will be handled.

  2. 02

    Choose the specification

    The base pallet, one or two wings, materials and dimensions are defined in the proposal.

  3. 03

    Confirm the construction

    The drawing, load cases, export requirements, volume and any testing are established before ordering.

Marking for the market

ISPM 15 when required by the export flow

Flexpall's wooden components can be heat-treated and IPPC-marked according to ISPM 15 for destinations where the rules require it. The marking is not a general product certification and does not automatically mean that every market has the same requirements. Check the destination with Swedish Board of Agriculture.

  • GoodsDimensions, weight and support points determine the design.
  • Load caseStatic, dynamic and any pallet-racking requirements must be described.
  • DestinationThe export market determines treatment, marking and documentation.

Related solutions

Pallet, packaging or complete wooden package

Frequently asked questions

Frequently asked questions about the Flexpallet

How does the Flexpallet work?

It comprises a base pallet that can be supplemented with one or two wings. The wings adapt the support area to the length and support points of the goods.

Which dimensions and loads are possible?

No general maximum dimensions or load value are published. Dimensions, weight and load capacity are established for the chosen specification and load case in the quote.

What does patent number EP 2 502 842 mean?

The number refers to a European patent publication for an adjustable pallet system. If legal status in a particular country matters, it must be checked for the actual market.

Can the Flexpallet be ISPM 15-marked?

Wooden components can be heat-treated and marked according to ISPM 15 when required by the destination country’s rules.

What should I include in the quote request?

Send dimensions, weight, support points, handling, load cases, volume, destination and any testing or documentation requirements.

Adapt the support area

Does the Flexpallet suit your goods?

Send product dimensions, weight and required support points so the right base pallet and wing specification can be assessed.

Request a quote

Flexpallet – an adjustable custom palletArt. 2101
Request a quote →