Sawn timber for packaging
38 × 100 mm boards for industrial packaging
Wooden boards, 38 × 100 mm, article 1807, can be used for protection, reinforcement and packaging, including pallet-collar manufacture for export. Specify the length, timber grade, moisture content and processing needed for the application. Confirm any treatment and marking requirements for the destination and finished packaging.
Dimensions
38 × 100 mm
38 × 100 mm is the board cross-section. Specify the required length and quantity.
Material
Wood
Sawn timber for packaging and reinforcement requirements.
Marking
Treatment and drying by agreement
State any required ISPM 15 treatment, IPPC marking or kiln drying separately. Confirm the treatment, drying and documentation for the supplied order and destination; a drying label alone does not establish compliant treatment and marking.
Flexible applications
Prepared for protection, reinforcement and packing
Use the boards to protect goods beneath securing tape, reinforce goods during container transport or form part of a packaging solution, including pallet-collar manufacture. Check the board dimensions and preparation against the goods, support and handling requirements.
- Protection beneath tape around secured goods
- Reinforcement during container transport
- Packaging and pallet collar manufacture for export
From requirement to supply
Specify the boards in three steps
Confirm the board format, intended application and any requested preparation with GLF.
- 01
Define
Share the 38 × 100 mm requirement, quantity and intended use.
- 02
Configure
Specify drilling, fastening or marking needs, including intervals such as 500 mm where required.
- 03
Confirm
Review the final ISPM/KD board specification and supply requirements with GLF.
