# ISPM 15 for pallets and wood packaging – marking and export requirements

- Canonical: <https://glf.se/ispm-15-pallets-marking-export-requirements/>
- Website: GLF Pallet Group AB
- Language: `en`
- Last modified: `2026-10-29T13:21:58+00:00`

<https://glf.se/wp-content/uploads/2025/01/ispm-15-markta-trapallar-1030x773.jpg>

January 28, 2025/[0 Comments](https://glf.se/ispm-15-pallets-marking-export-requirements/#respond)/in [GLF](https://glf.se/glf-2/), [GLF](https://glf.se/stories/), [GLF Answers](https://glf.se/stories/answers/), [Products](https://glf.se/stories/?story_topic=stories-products)/by [Erik Wester](https://glf.se/author/erik/)﻿﻿﻿

 Choose and check packaging for export
 ## ISPM 15 for pallets and wood packaging – marking and export requirements

 By Erik WesterPublished January 28, 2025Updated October 29, 2026Reviewed October 12, 2026Expert reviewer: Erik Wester

  Direct answer

 GLF supplies pallets and wooden packaging for export, adapting construction, materials, treatment and marking to the goods and destination. This guide connects the destination requirements with the pallet, collars, lids and dunnage included in your packaging.

  [ISPM 15](https://www.ippc.int/en/core-activities/standards-setting/ispms/) is the phytosanitary standard for wood packaging material. Where the destination requires it, components within scope must be debarked, treated using an approved method and correctly marked. Select the pallet’s design, condition and load capacity for the goods and handling as a separate part of the specification.

  ## Check the complete mark

 IPPC symbol, country code, producer/treatment provider code and treatment code.

 See what each part means

  **Guide updated**12 October 2026 First published 28 January 2025

 Author: [Erik Wester](https://glf.se/author/erik/)

 Check the destination, all packaging components and how the pallet will be used before dispatch.

 **Sources**IPPC, the Swedish Board of Agriculture and the destination country’s plant health authority.

 GLF’s ISPM 15 certificates

  In this export guide – choose a section

 01Destination country

 ## When do you need to check ISPM 15 requirements?

 Check the shipment’s destination and transport route before choosing packaging. Many countries require ISPM 15 for wood packaging material entering the country. There is no general marking requirement for trade within the EU, but specific rules apply in certain cases, including packaging from demarcated areas affected by particular quarantine pests. See [the Swedish Board of Agriculture’s guidance on wood packaging material used in international trade](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/traemballage-som-anvands-vid-internationell-handel).

 Check the following for your shipment:

 1. **Destination country and region.** Do not rely solely on descriptions such as “Europe” or “EU”. Territories and regions may have specific phytosanitary rules.
2. **Current import requirements.** Check which materials and packaging components are covered, which treatments are accepted and whether any specific conditions apply to the shipment. Verify the information with the destination country’s plant health authority. You can find the authority through [the IPPC country list](https://www.ippc.int/en/about/ippc-network/countries/).
3. **Transit and onward transport.** Specify whether the goods will be transferred between vehicles, whether the packaging will be replaced or whether the same pallet will travel to another country. Check the relevant requirements for the entire planned transport chain.
4. **The recipient’s requirements for the load carrier itself.** Confirm dimensions, handling, load capacity and any pallet standards in addition to the phytosanitary requirements.

 **Example – onward transport:** The goods are first delivered to a warehouse within the EU and then sent on to England on the same pallet. Choose packaging that also meets the requirements for the later stage. England is covered by Great Britain’s ISPM 15 requirements for solid wood packaging material from the EU that falls within scope. See [the Forestry Commission’s current import guidance](https://www.gov.uk/guidance/wood-packaging-material-for-import-and-export).

 02The IPPC mark

 ## How to read the IPPC mark

 ISPM 15 is the name of the standard. IPPC stands for the International Plant Protection Convention, and the IPPC symbol forms part of the official mark. In practice, the complete mark is often called the IPPC mark or IPPC stamp.

 Read the complete mark: the IPPC symbol, country code, producer/treatment provider code and treatment code belong together.

 | Part of the mark | What you should be able to read |
| --- | --- |
| IPPC symbol | The official symbol, separated from the codes. |
| Country code | Two letters, such as SE for Sweden. The code identifies the country where the operator is registered, not the shipment’s destination. |
| Producer/treatment provider code | Identifies the responsible producer, treatment provider or other operator authorised to apply the mark. |
| Treatment code | Indicates the approved treatment used, such as HT. |

 The mark must have a border and a line separating the symbol from the codes. It must be legible, durable and non-transferable to other packaging. It must be visible when the packaging is in use, preferably on at least two opposite sides. The mark must not be hand-drawn. “HT” on its own, an IPPC symbol without codes or a supplier’s name does not constitute a complete mark. See [IPPC guidance on wood packaging material and marking](https://www.ippc.int/en/publications/92080/).

 **Example of what the codes mean:** SE-M3522 together with HT indicates the Swedish producer/treatment provider code M3522 and heat treatment. A complete mark also requires the IPPC symbol and the correct layout. The code text alone is not sufficient.

 If the mark is missing, illegible or appears incomplete, establish whether the packaging meets the requirements before a shipment that requires ISPM 15. Ask the supplier to assess whether the packaging can be used, needs to be replaced or should be handled in another way within an approved system.

 03HT and drying

 ## What does HT treatment mean?

 HT stands for heat treatment and denotes conventional heat treatment. The temperature must be at least **56 °C throughout the wood, including its core, for at least 30 continuous minutes.** Warm air in a timber kiln is therefore not sufficient on its own. The treatment must meet the standard’s requirements and be carried out within a controlled system. See [ISPM 15, Annex 1](https://assets.ippc.int/static/media/files/publication/en/2019/02/ISPM_15_2018_En_WoodPackaging_Post-CPM13_Rev_Annex1and2_Fixed_2019-02-01.pdf).

 ### Is dried timber the same as HT-treated timber?

 Conventional timber drying aims to reduce the wood’s moisture content. Drying can be combined with an approved phytosanitary treatment, but describing a pallet as “dried” does not in itself show compliance with ISPM 15. Nor does the HT mark indicate a particular final moisture content. Specify any moisture requirements separately.

 The Swedish **KD 56 °C/30 min** system meets the temperature and time requirements for heat treatment. It must be distinguished from a general statement that timber has been dried. When timber from this system is used for ISPM 15 packaging, the requirements for an approved treatment provider, traceability and marking must also be met. A KD mark on the timber does not replace the complete ISPM 15 mark on the finished export packaging. See [the Swedish Board of Agriculture’s information on the KD system](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/marka-tra-med-kd-56c-30-market) and [the requirements for ISPM 15 marking](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/marka-traemballage-och-tra-med-ispm-15-market).

 The wood must also be debarked. Only the limited amounts of residual bark permitted by the standard may remain. Treatment reduces the risk of spreading plant pests but provides no lasting protection against new infestations. HT is one of the standard’s treatment codes; the others are DH, MB and SF. Not all methods are permitted or used in Sweden. Read the code on the packaging concerned.

 ### Phytosanitary treatment and load capacity

 ISPM 15 does not specify how many kilograms a pallet can carry or whether it is suitable for pallet racking. Assess its design, load distribution, support surfaces, lifting method and condition separately. The same pallet is loaded differently when standing on a level floor and when resting on racking beams.

 A EUR or EPAL mark does not replace the ISPM 15 mark. EPAL lists quality, treatment and repair marks as separate elements in its [marking guide for EPAL pallets](https://www.epal-pallets.org/eu-en/load-carriers/epal-euro-pallet). When choosing [EUR pallets](https://glf.se/product/eur-pallet/) you need to check both the marking and whether the pallet is suitable for the load and handling conditions.

 Read more about [the difference between EPAL marking and ISPM 15](https://glf.se/epal-marking-licence-repair/#format-och-system) and how to check licence details.

 04All packaging components

 ## Which materials and packaging components are covered?

 Specify every packaging component, including any loose wood added during packing. Treatment and marking follow the materials and destination requirements for each component.

 Solid wood in components such as boards, battens, blocks and runners is normally covered. Packaging made entirely of processed wood, such as plywood, OSB or particleboard manufactured using glue, heat or pressure, is exempt from ISPM 15. Packaging made entirely of wood no more than 6 mm thick is also exempt. Planing or conventional drying alone does not make solid wood exempt. See [the Swedish Board of Agriculture’s material exemptions](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/traemballage-som-anvands-vid-internationell-handel).

 The pallet, pallet collar and wooden lid are separate packaging components. Check treatment and marking for each component covered by the destination requirements.

 The plywood panel is exempt from ISPM 15. If the lid has solid wood battens, they must be assessed separately.

 The table applies when the destination requires ISPM 15 for the wood packaging material concerned.

 | Packaging type | What needs to be checked? | Relevant exemption or limitation |
| --- | --- | --- |
| Pallet with solid wood boards, battens or blocks | Approved treatment, complete marking and any repairs. | The exemption for processed wood blocks does not apply to the pallet’s other solid wood components. |
| Solid wood pallet collar | The collar’s own treatment and marking, separately from the pallet’s. | Metal hinges do not change the requirement for the wooden sides. |
| Solid wood lid | The lid’s treatment and marking. | A marked base does not establish the lid’s compliance. |
| Plywood lid without solid wood components | That all wooden components are made from exempt panel materials. | The standard does not require plywood to be HT-treated or ISPM 15-marked. |
| Plywood lid with solid wood battens | The battens’ material and compliance, and the marking of the assembled unit. | The panel’s exemption does not automatically extend to the battens. |
| Box or crate combining panels and solid wood | The base, frame, runners, battens and internal supports, and the marking of the unit. | A construction is not exempt simply because its walls are made of plywood. |
| Loose solid wood dunnage, wedges and spacers | Treatment and a complete, legible mark on every piece used, including after cutting. | The pallet’s mark does not cover loose dunnage. |
| Packaging made entirely of wood no more than 6 mm thick | The thickness of the wood throughout the packaging. | The exemption does not apply if thicker solid wood components are included. |

 Specify whether your [plywood lids](https://glf.se/product/custom-pallet-plywood-lid/) need retaining battens underneath to keep them in place. The same material checks are needed for [custom boxes and wooden crates](https://glf.se/product/custom-crates-boxes/).

 A permanently assembled unit combining treated solid wood and processed wood can be marked as a single unit. The mark may be placed on the plywood component to keep it visible. This does not mean the plywood itself has required treatment. The same option does not apply to a temporary combination of a pallet, loose collars and a lid. See [ISPM 15, Annex 2, on composite units](https://assets.ippc.int/static/media/files/publication/en/2019/02/ISPM_15_2018_En_WoodPackaging_Post-CPM13_Rev_Annex1and2_Fixed_2019-02-01.pdf).

 ### Pallet collars and loose dunnage need separate checks

 Check every [pallet collar](https://glf.se/product/standard-pallet-collars/) included. Also check any wood added by the packing team, such as wedges against the goods, supports beneath a machine or bracing inside a container.

 **Example – cut dunnage:** A treated and marked timber batten is cut into three supports. If only one support retains a complete mark after cutting, the other two lack the required marking. Plan cutting and marking so that each piece meets the requirements. Any additional marking must be applied by an authorised operator. See [the Swedish Board of Agriculture’s instructions for dunnage](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/marka-traemballage-och-tra-med-ispm-15-market).

 05Reuse

 ## What are the rules for new, used and repaired pallets?

 **New pallets:** Check treatment and complete marking when ISPM 15 is required. You still need to carry out these checks if the pallet is new or sold as an export pallet.

 **Used pallets without alterations:** Under ISPM 15, a correctly treated and marked pallet does not need to be treated or marked again simply because it is reused. This applies throughout the pallet’s service life, provided it has not been repaired, remanufactured or otherwise altered. The mark therefore has no general expiry date, but the pallet must still be fit for use and the requirements for its next destination must be checked. See [ISPM 15, section 4.3.1](https://assets.ippc.int/static/media/files/publication/en/2019/02/ISPM_15_2018_En_WoodPackaging_Post-CPM13_Rev_Annex1and2_Fixed_2019-02-01.pdf).

 **Repaired pallets:** The original stamp is not sufficient to demonstrate that a subsequent repair meets the requirements. For repairs in Sweden, the Swedish Board of Agriculture states that only operators with marking authorisation may repair packaging already bearing an ISPM 15 mark. No more than one third of the components may be replaced for the work to count as a repair. Replacement components must be marked and traceable. Under the Swedish guidance, components from used ISPM 15 packaging may not be used as repair components.

 **Remanufactured pallets:** In Sweden, the Swedish Board of Agriculture requires the entire packaging unit to be heat-treated again if more than one third of the components are replaced. Previous marks must be removed and the packaging must be marked again. See [the Swedish Board of Agriculture’s rules for repair and remanufacture](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/marka-traemballage-och-tra-med-ispm-15-market).

 If a board has been replaced, the design has been altered or the history is unclear, establish whether the packaging still meets the requirements before exporting. If you see signs of active pest infestation, a legible mark alone is not sufficient. Also check for cracks, decay, damaged blocks and other defects that affect handling.

 Check both the marking and the pallet’s condition before reuse. Establish which repairs and alterations have been made.

 06Documentation

 ## What documentation do you need?

 Distinguish between three types of evidence and information:

 1. **The mark on the packaging.** This identifies the approved phytosanitary treatment within the ISPM 15 system. Under the standard, a separate phytosanitary certificate is then not required for the packaging itself. Documentation requirements for the goods and destination must be assessed separately. See [ISPM 15, section 3.1](https://assets.ippc.int/static/media/files/publication/en/2019/02/ISPM_15_2018_En_WoodPackaging_Post-CPM13_Rev_Annex1and2_Fixed_2019-02-01.pdf).
2. **The supplier’s authorisation or certificate.** This describes the operator’s authorisation or the conditions that have been assessed. It does not replace the required marking on the packaging supplied.
3. **Information for your order.** Specify which components must comply with ISPM 15 and what treatment and documentation are needed. Ask the supplier to confirm the requirements for your order. A drawing, materials list and any photographs of existing packaging can help clarify which components the order covers.

 ### GLF’s ISPM 15 certificates and marking authorisations

 GLF’s marking authorisations and ISPM 15 certificates identify the company and operation responsible for the stated activities. The [Sustainability & Quality](https://glf.se/environment-quality-sustainable-pallets-and-packaging/#certifikat) page links the original documents:

 - [View the original](https://glf.se/wp-content/uploads/2024/10/Engelskt-intyg-ISPM-15.pdf) Marking authorisation · Sweden
   #### Genarp
   Authorisation code**SE-M3522**
   **Company:**  GLF Genarp AB
   **Site:**  [Genarp](https://glf.se/about-glf/production/genarp/)
   **Certificate dated:**  28 October 2024
   [Open the Genarp certificate (PDF, English)](https://glf.se/wp-content/uploads/2024/10/Engelskt-intyg-ISPM-15.pdf)
- [View the original](https://glf.se/wp-content/uploads/2024/10/Engelskt-intyg-2024-ISPM-15-TRAAB.pdf) Marking authorisation · Sweden
   #### Sävsjöström
   Authorisation code**SE-G3550**
   **Company:**  GLF Träab AB
   **Site:**  [Sävsjöström](https://glf.se/about-glf/production/savsjostrom/)
   **Certificate dated:**  15 April 2024
   [Open the Sävsjöström certificate (PDF, English)](https://glf.se/wp-content/uploads/2024/10/Engelskt-intyg-2024-ISPM-15-TRAAB.pdf)
- [View the original](https://glf.se/wp-content/uploads/2026/10/glf-polska-mielec-ispm15-ht-2026-2027.pdf) ISPM 15 certificate · Poland
   #### Mielec
   Authorisation code**PL-18926**HT
   **Company:**  GLF Polska Mielec Sp. z o.o.
   **Site:**  ul. COP-u 3, Mielec
   **Certificate number:**  DBL-2026-6159-01-BLS
   **Period stated in the certificate:**  9 October 2026–8 October 2027
   [Open the Mielec certificate (PDF, English)](https://glf.se/wp-content/uploads/2026/10/glf-polska-mielec-ispm15-ht-2026-2027.pdf)

 [The Swedish Board of Agriculture’s authorisation list](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/marka-traemballage-och-tra-med-ispm-15-market/foretag-med-tillstand-att-marka-tra-och-traemballage) checked on 11 October 2026 identified GLF Genarp AB as SE-M3522 and GLF Träab AB as SE-G3550. Swedish marking authorisations are tied to the organisation and site and have no fixed expiry. Mielec’s certificate states the period 9 October 2026–8 October 2027. For procurement approval, use the relevant authority or issuer to confirm the current company and site status.

 The documents apply to the companies and sites specified in each document. Confirm treatment, marking and suitability for the delivery concerned. The certificates supplement the purchasing information and do not replace the ISPM 15 mark on the packaging.

 07Ordering

 ## How to order the right packaging from GLF

 GLF offers EUR-format pallets, [EU pallets with solid wood blocks](https://glf.se/product/eu-pallet/), [5D full-size pallets](https://glf.se/product/one-way-pallet/) and [industrial pallets](https://glf.se/product/industrial-pallet-ippc/) for different load and handling needs. We select the construction and the required treatment and marking for your goods and destination.

 For specific support points, dimensions or protection needs, GLF designs [custom pallets](https://glf.se/product/custom-pallet/) and [wooden packaging](https://glf.se/product/custom-packaging/) around the application. Include the complete assembly and any wood added during packing so the design and export specification cover the whole solution.

 Example of custom-sized packaging from GLF. Describe the support surfaces, securing method and all wooden components in your enquiry.

 ### Ordering checklist

 - **Destination and transport chain:** destination country, region, transit, transfers between vehicles and any onward transport.
- **Verified requirements:** the official source and date checked, and any specific conditions set by the recipient.
- **Goods and dimensions:** the goods’ overall dimensions, total weight, load distribution, support surfaces and, where needed, centre of gravity or a drawing.
- **Handling:** forklift, pallet truck or other lifting method, lifting direction, stacking and any storage in pallet racking.
- **All packaging components:** pallet, number of collars, lid, box, runners, wedges, spacers and dunnage. Specify the materials where known.
- **Treatment and marking:** which components must comply with ISPM 15, the required treatment code and how the mark will remain readable after packing.
- **New or used:** the required specification and any known repairs or alterations if existing pallets will be used.
- **Other product requirements:** such as moisture content, cleanliness and surface quality where required by the goods or storage conditions.
- **Quantity and delivery:** quantity, delivery location, required date and whether the requirement is one-off or recurring.
- **Documentation:** the order information and any certificates you need, and who will check the packaging before dispatch.

 Send the goods, handling and destination information to GLF. We help develop the design, treatment and marking specification as the basis for a packaging proposal and quotation.

 ## Sources

 - [ISPM 15, Annex 1](https://assets.ippc.int/static/media/files/publication/en/2019/02/ISPM_15_2018_En_WoodPackaging_Post-CPM13_Rev_Annex1and2_Fixed_2019-02-01.pdf)
- [the Swedish Board of Agriculture's guidance on wood packaging material used in international trade](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/traemballage-som-anvands-vid-internationell-handel)
- [the requirements for ISPM 15 marking](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/marka-traemballage-och-tra-med-ispm-15-market)
- [the Swedish Board of Agriculture's public authorisation list](https://jordbruksverket.se/vaxter/handel-och-resor/tra-traprodukter-och-traemballage/marka-traemballage-och-tra-med-ispm-15-market/foretag-med-tillstand-att-marka-tra-och-traemballage)

  https://glf.se/wp-content/uploads/2025/01/ispm-15-markta-trapallar.jpg 1440 1920   Erik Wester  https://glf.se/wp-content/plugins/glf-site-header/assets/glf-logo-tight.png  Erik Wester2025-01-28 14:05:212026-10-29 14:21:58ISPM 15 for pallets and wood packaging – marking and export requirements

 0 replies

 ### Leave a Reply

Want to join the discussion?
Feel free to contribute! ### Leave a Reply

 ## More from GLF Stories

[All GLF Stories](https://glf.se/stories/)

- [Production### GLF invests for the long term with a new package cross-cut saw for Genarp Read about the investment and the next steps for production in Genarp.](https://glf.se/new-package-cross-cut-saw-genarp/)
- [Partnership### Södra highlights its partnership with GLF in a new film](https://glf.se/sodra-glf-partnership-film/)
- [Climate action### GLF Genarp AB’s climate target has been approved by SBTi Services](https://glf.se/glf-genarp-climate-target-approved-sbti-services/)
- [Genarp### GLF plans to increase warehouse capacity in Genarp by approximately 20%](https://glf.se/glf-warehouse-expansion-genarp/)
- [Logistics### GLF strengthens warehouse flows through a new KTP project](https://glf.se/warehouse-optimisation-ktp-project-genarp/)
- [Storage### New bird-proofing keeps pallets and wooden packaging cleaner](https://glf.se/bird-proofing-pallets-wooden-packaging/)
- [The people at GLF### Meet Freddy Prahl, an essential part of GLF’s production team.](https://glf.se/meet-freddy-prahl/)
- [Sustainability### GLF – Every day we take concrete steps towards a sustainable future](https://glf.se/glf-sustainable-future/)
- [Environmental management### ISO 14001 at GLF – environmental management and evidence for buyers](https://glf.se/iso-14001-environmental-management/)
